RDL D-BT1A Wall-Mounted Bluetooth Audio Format-A Interface, Intuitive Single Button Pairing with LED Status Indication, Sends Received Bluetooth Audio to RDL Format-A Receivers

RDL D-BT1A Wall-Mounted Bluetooth Audio Format-A Interface, Intuitive Single Button Pairing with LED Status Indication, Sends Received Bluetooth Audio to RDL Format-A Receivers The D SERIES-BT1A modules are Bluetooth audio receiving modules compatible with RDL Format-A twisted pair receivers. When paired with a compatible Bluetooth enabled device, the module receives stereo audio from the Bluetooth source. The stereo signal is sent through two Format-A pairs to any RDL Format-A receiver. A stereo/mono switch set by the installer permits summed mono audio to be sent over one switch-selected pair to the Format-A receiver. KEY FEATURES - Bluetooth Audio Input for Installed Sound System - Intuitive Single Button Pairing with LED Status Indication - Special Software Not Required for Module Setup - Customize the Module ID Name and Programming Password through the Bluetooth Connection - Sends Received Bluetooth Audio to RDL Format-A Receivers - Mono Summed or Stereo Audio Input Mode is Switch-Selectable on Rear Panel - Rear-Panel Switch Selects which RJ45 Pair (A, B or C) is Fed in Mono Summed Mode - Daisy-Chain up to Three D SERIES-BT1A modules to One Format-A Receiver in Mono Mode - Remotely Powered through Twisted Pair Cable - Signal and Power Pair Pass-Through on RJ45 Jacks SPECIFICATIONS - Output: RDL Format-A (RJ45) - Format-A Input: RJ45 LOOP IN - Format-A Signal Pair Used: A, B, or C (summed mono mode, rear-panel switch-selectable); B and C (stereo mode, pair A pass through) - Frequency Response: 20Hz to 20kHz (± 0.5 dB) - THD+N: <0.1% - Noise below -20 dBFS: <-70 dB - Crosstalk (channel to channel): <70 dB - Audio Operating Levels: -20 dBFS = +4 dBu (balanced), nominal - Ambient Operating Environment: 0°C to 40°C - Power Requirement: 24 Vdc @ 100 mA (through RJ45) - Dimensions: 1.73"W x 4.11"H x 1.62"D - Weight: 0.29 lbs

• Bluetooth Audio Input for Installed Sound System
• Customize the Module ID Name and Programming Password through the Bluetooth Connection
• Mono Summed or Stereo Audio Input Mode is Switch-Selectable on Rear Panel
• Rear-Panel Switch Selects which RJ45 Pair (A, B or C) is Fed in Mono Summed Mode
• Signal and Power Pair Pass-Through on RJ45 Jacks